Ampolt UPS


Ampolt Uninterruptible power supply (AUPS) is a DSP based Sine Wave UPS with reliable, regulated and stabilized Pure Sine Wave Output, is a complete power generation system that is suitable for all types of commercial establishments and is capable of running everything from Lights to Air Conditioners, in the most cost effective manner. Ampolt Uninterruptible power supply (AUPS) has potential to cater the growing needs of the power. Ampolt DSP based Sine Wave UPS supplies pure power and is 100% safe to run most sophisticated, expensive and sensitive office equipment’s.

Read More

An uninterruptible power supply, also uninterruptible power source, UPS or battery backup, is an electrical apparatus that provides emergency power to a load when the input power source or mains power fails. A UPS differs from an auxiliary or emergency power system or standby generator in that it will provide near-instantaneous protection from input power interruptions, by supplying energy stored in batteries, supercapacitors, or flywheels. The on-battery runtime of most uninterruptible power sources is relatively short (only a few minutes) but sufficient to start a standby power source or properly shut down the protected equipment.

A UPS is typically used to protect hardware such as computers, data centers, telecommunication equipment or other electrical equipment where an unexpected power disruption could cause injuries, fatalities, serious business disruption or data loss. UPS units range in size from units designed to protect a single computer without a video monitor (around 200 volt-ampere rating) to large units powering entire data centers or buildings. The world's largest UPS, the 46-megawatt Battery Electric Storage System (BESS), in Fairbanks, Alaska, powers the entire city and nearby rural communities during outages.

The primary role of any UPS is to provide short-term power when the input power source fails. However, most UPS units are also capable in varying degrees of correcting common utility power problems:

  • Voltage spike or sustained overvoltage
  • Momentary or sustained reduction in input voltage
  • Noise, defined as a high frequency transient or oscillation, usually injected into the line by nearby equipment
  • Instability of the mains frequency
  • Harmonic distortion, defined as a departure from the ideal sinusoidal waveform expected on the line

Ampolt UPS Is Compatible For All Kind Of Usage Like


  • Lighting systems.
  • Medical Equipment’s.
  • Domestic loads.
  • Computers etc.


Salient Features And Benefits Of UPS


  • DSP based intelligent control.
  • LCD based display for user-friendly display of parameters and status.
  • Dynamic short circuit protection with fold-back current limiting.
  • Protection against low battery, over load, short circuit.
  • Early warning for battery low and overload conditions.
  • Cutoff and auto restart with permanent cut after 5 consecutive cut off.
  • SMPS type constant current charger with full charge cutoff.
  • Pure sine wave output which is safe for all kind of loads.
  • Ideal for Mixed load application.
  • Protection against accidental output feedback disconnection.
  • Protection against reverse polarity.

Technical Specification


Power Rating 300VA-10KVA
Battery Input Voltage 12V DC-48V DC
Mains Input Voltage 170V-250V AC, 50Hz
AC Output Voltage 220V +/-3%,50Hz
Charger Working Range 170V-270V AC Mains Input